Dynex DX-ESATAP Manuel d'utilisateur télécharger pdf (Page 13)

Specifications

An eSATA

peripheral is not

detected by the

computer

Right-click the My Computer icon on your desktop, click

Properties, then click the Device Manager. If the SATA

peripheral is listed in the Device Manager, it should be

working correctly.

If it is shown as an unknown device, the cause may be a

defective eSATA peripheral or its software drivers. Do the

following:

• Check the eSATA connection and try a different eSATA cable.

• Check your SATA device's power source, and make sure that it

provides enough power for your SATA device to run stably. Refer

to the SATA peripheral’s user guide for the power supply

specifications.

• Uninstall your SATA device, then reinstall the SATA device driver.

• Make sure that the SATA device is using a current driver. You can

download current driver software from the manufacturer's Web

site.

Chipset

Silicon Image 3132

Interface

One-lane PCI Express bus

Power port

External: 2 × Ø1.3 DC Jack

Internal

1 × 4-pin power connector

System

environment

Operating temperature: 41°F~104°F (5°C~40°C)

Operating humidity: 20%~80% RH

System

requirements

Windows XP, Windows Vista; Mac 10.4.x or higher

Certification

FCC Class B, ICES-003

Symptom Possible Solution

07-643 DX-ESATAP - small combined.fm Page 13 Thursday, December 27, 2007 12:08 PM

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 51 52

Pas de commentaire

Dynex DX-ESATAP Manuel d'utilisateur Page 13